• Car Phone Mount is built-in strong wear-resisting ABS material. Inner side with EVA cotton is for high anti-skid&anti-shock performance, to avoid any damage to your phone
  • Car Phone Mount with the advantage is easy to release &lock. Just press the car mount holder dot, and the bracket arm will automatically grip your phone and lock it
  • Car Phone Mount with 360 degree rotating will never block your sight, and phone holder can be placed anywhere. Make your driving more stable and secure
  • Car Phone Mount has spring clip hook to fix phone holder firmly in car air vent, Near main driver seat, convenient for you to do call, do GPS and listen music
  • Car Phone Mount’s size is range from 2.7’ to 3.9’, , and suitable for 2.7’-3.9’ inch smartphone

Buy from Amazon.com

Product Description

Car Mount,Ankeming Car Phone Mount Car Air Vent Cradle Mount for iPhone X 8 7 7plus 6 6s 5 4 Samsung Galaxy S5 S6 S7 S8 and Most Cell Phone.

Compatible Phone Model: for iPhone 7 7 Plus SE 6s 6 Plus 6 5s 5 4s 4 Samsung Galaxy S6 S5 S4 LG Nexus Sony Nokia
Why choose ANKEMING car phone mount?
Installed in the outlet, do not block the car line of your sight.
phone holder with 360 degree rotating spring clip hook, offer the right angle for you.
car mount holder is near main driver seat, easy to operate.
Soft foot bracket to protect your phone better.How to install the cell phone holder for car?
take the base with ball joint right into the screen, push up it tightly.
set the screw nut of car cradle onto the ball of joint, push the tripod with ball into the circular groove, tighten the circular nut.
push the triangle with spring into right place from bottom to the top.Warranty
Spring hook must be inserted into car air vent.
Compatible with phone width of 2.7’ to 3.9’,not including width less than 2.7’ or width more than 3.9’.
Any question, please don’t hesitate to contact ANKEMING Support Team. We will resolve it ASAP within 12 hours.
18 month quality satisfaction guarantee


Nowadays people are moving around with cell phones, are not they? And sometimes the battery does not last all day … The best solution is to use a portable charger to ensure that your smartphone stays on even when there is no outlet nearby. But when it comes to choosing a charger, you have to do a lot of research so you do not risk ruining your phone, see!

You need to keep an eye on the charge capacity, which is measured in mAh. It shows whether or not the charger can fully charge the battery. It works like this: if the battery of the phone has a capacity of 3.000 mAh, the charger must have at least 3,000 mAh also to have a full charge. If the charger has 6,000 mAh, for example, then it can offer two full loads. Now, if the capacity is 1,500 mAh, then you can only charge 50% of the battery.

Another important detail is the power, which is measured in W [SPEAK WATTS]. Pro mobile if charged, it is necessary that the electric current coming out of the battery is greater or equal to the charging power of the smartphone, ok? If it is smaller, the cell phone will not charge! This mAh and W information is in the manual or in the box.

And to facilitate, look at this tip!

Portable batteries lose their useful life over time, meaning they lose performance and load capacity. To make the charger last longer, just recharge the device when the power is completely finished. Oh, and do not forget to turn off your cell phone when recharging so you do not waste battery power!

The Hard Bank has 2 models of chargers, the Power Bank AS 802 (pictured), which is designed to allow you to stay connected anywhere, with 6600 mHa, has a USB port 2.1A and 1A, which allows simultaneous charging of two devices and features an LED emergency flashlight.

How to clean your phone or tablet screen? Product and movie!

The screen cleaning of a smartphone or tablet is simple. What you need to understand is not exactly what should be done while cleaning, but what should not be done and that can damage your device, such as using chemicals in cleaning the screen. Let us understand and look for the best solutions, products, and cleaning for the screens and films of these devices .

Products to clean cell phone screen: what not to use?

Before you go out shopping for a miracle cleansing kit for cell phone screens, it should be said things that should not be done by anyone who wants to wipe the screen of a tablet or smartphone without damaging it.

Chemicals should not be used. The only combination accepted is a combination of a part of water for a part of vinegar and even then, that combination is questionable. There are solutions recommended by manufacturers of electronic devices that can be used safely, but nothing replaces good old filtered water (because it filters particles that could scratch the screen).

Do not use paper towels, abrasive cloths, tissues, or any other type of cloth other than microfiber. This type of cloth was created specifically for the delicate surfaces of the fabrics.

When using water or cleaning product, do not overdo the amount. The cloth must be slightly dampened, and the screen must be turned off during cleaning.

Do not be crude at the time of cleaning, or you will scratch your device. If a dirt is persistent, prefer to lightly past several times and gently. If the screen has a protective film, the method may be slightly different.

How to clean your cell phone: starting with the microfiber cloth

The microfiber cloth is the same that comes with several one glasses for cleaning. It is a cloth with a special fabric, produced in order to avoid damage to the screens of electronic devices. They are very small fibers that do not attract dust and oils. This will not rub these particles on your device, avoiding scratches.

Cleaning the screen: procedures

Now that you have the appropriate cloth to clean the screen, the process is very simple:

  1. Always turn off the device.
  2. Wipe the dry cloth from left to right and then from bottom to top. Do not make circles with the cloth. Repeat the horizontal and vertical movements if the device is very dirty, but more persistent dirt is to the next step.
  3. Dampen part of the cloth with filtered water or a specific cleaning solution. Do the same cleaning process that was performed with the dry cloth.
  4. Dry the screen with the part of the cloth that is dry.
    To wipe the microfiber cloth, soak the cloth in lukewarm water and mild soap, rinse thoroughly, and allow to dry. Do not use any chemicals to wipe the cloth, either. These can damage the fabric.