This fits your .
  • Enter your model numberto make sure this fits.
  • FIT MODEL : Suitable for all mobile phones with smooth surfaces , such as iPhone , Samsung ( iPhone 7 7 Plus SE 6s 6 Plus 6 5s 5 4s etc )
  • NON-SCRATCH : Plastic mounting clip keeps your vents from being scratched, soft mount surface of the holder won’t scratch your phone
  • NON MAGNETIC : no magnet will not influence the mobile phone signal ; Non magnet safety and environmental protection .Strong suction built into the mount head ensure your phone stays securely attached throughout your drive . Easy to remove, without leaving marks, can be reused .
  • FUNCTION : 360 Degree Rotation provides you the best viewing angle, and no need to patch , just single hand operation . Keep your driving safety .
  • TIPS : Make sure your mobile phone surface smooth and clear when attaching it to the holder. Mobile phones with non-smooth surface and radian surface can NOT attached to the holder directly, need to stick the PET transparent film with 3M tape to use .

Buy from Amazon.com

Product Description

Nano Phone Car Mount and 360? Rotation , Hongfa Replacement Non-Magnetic Car Mount Holder for iPhone 7 Plus 6s Plus SE Samsung Galaxy S8 Edge S7 S6 Note 5- Retail Packaging- Gold


Kindly Reminder: Make sure to fit model, specific details please consulting online customer service.


Shipping List
1pcs Non magnetic micro suction vehicle mobile phone support +PET transparent patch , alcohol wipe paper , adhesive tape

Applicable Model

Suitable for all mobile phones with smooth surfaces , such as iPhone , Samsung ( iPhone 7 7 Plus SE 6s 6 Plus 6 5s 5 4s etc )

Reminders

Tear off the protective film before use.

Press your phone against the surface of the holder for a few seconds .

If the suction is decrease ,please clean the surface of the holder with a wet cloth , then let air dry and it will work as good as new.

If you want separate your phone from the holder,please tilt your phone to one side then take it down.

How to use Non magnetic mobile phone holder

1,Clean the phone surface with alcohol wipe paper ;

2, Remove the protective film of the black nano film before use ;

3, Put your phone on use, paste to the fixed position and press for ten seconds

4, After use , nano film stained with ash will let the holder ‘s suction decrease , use the tape posted repeatedly nano film several times to remove the dust from the surface , effect restore

About Hongfa :

Hongfa always shipping with good quality protected box, in order to prevent the products damage, Hongfa always provide the best service for you.

Solar Mobile Phone Charger: How to Choose Yours?

-Weight and size: at first all chargers are portable, but it is good to know if it is really lightweight and does not take up too much space. If the size or weight is disproportionate, there is a great risk that you will abandon the use of the device.

-Price per power generation: It is very important to know the power capacity of the charger and to realize how much you are paying for it. This means that not always the cheapest charger will be the best option.

-The need for your device: Some phones and smartphones need more power than others. If the chosen charger is not able to deliver this power, the time to recharge may become unfeasible.

Tips for increasing the battery life of your phone

  • Decrease screen brightness: The brightness of the screen is often responsible for more than half the power used in your phone. Phones with large screens like the Motorola Milestone have the screen as one of the major consumer villains. A very bright screen is only useful when using the phone in the sun outside. As such times are often rare, leave the screen brightness to a minimum.
  • Disable Bluetooh : Bluetooth is little used on devices compared to other wireless options. When you need to use Bluetooh, turn it on only on time and then hang up.
  • Turn off the keypad sounds: that noise when you press each key, if off, can contribute to your battery to last a few more minutes at the end of the day.

Turn off the wi-fi where there are no known networks: turn off the wi-fi. Otherwise the device will be running out of battery power by listing all the networks found wherever you are. This is even worse if I have been in transit, because as the signal from the networks becomes very variable, the phone ends up having to use more power to transmit the radio signals.

Turn off Wi-Fi where networks exist: If you need the phone to work longer before you can recharge it, you may want to leave the Wi-Fi (wireless network) turned off even at work or in places where there is a network without wire you can use. With Wi-Fi on, several programs are constantly exchanging information with the internet, which increases the consumption of the device.

  • Turn off automatic syncing: If you even need your phone on the internet, at least close non-essential programs. Programs and e-mail, Twitter and others constantly synchronize information with their servers. That eats a lot of drums!
  • Lock the screen or keyboard: especially when placing the device in a pocket or purse, lock the keyboard and the screen. If this is not done, the unit may be running out of power while the display is switched on and not in low power mode.
  • Use a darker theme: yes … this is a bit of paranoia, but in the Nokia N97 a white theme spent around 10% more battery than a black theme. I measured, believe me. In devices with LED screens and derivatives this difference is even greater. Use dark themes and fine print to “light” the smallest possible number of pixels on the screen. The battery lasts much longer.