• 360 ROTATABLE ANGLE: The ball joint enables this cell phone suction mount for car rotating at 360 degrees horizontally and vertically, allowing you to get the best viewing angle.
  • WASHABLE SILICONE SUCTION BASE: The super sticky silicone gel suction base can attach to windshield, dashboard and other smooth or textured surface to make the car mount for iphone 7 suction cup stably mounted. Further more, the suction base is washable and reuseable, and durable.
  • ONE HAND MOUNTING: The clamp of this universal phone holder suction is designed in two direction openning, you can mount your cell phone device only by one one hand.
  • UNIVERSAL COMPATIBILITY: The suction cup phone holder iphone 5 has a very big clamp, its open range is 53-90mm, fits for 4.0 – 6.0 inches smartphones, such as Samsung Galaxy S5 4 NOTE 2 3 4, iPhone 7 6 5S 5C 5, HTC ONE M7 8 9, DESIRE 820, even with cellphone cases.
  • MULTIPLE PURPOSE: The suction car mount iphone 6 plus’s base is made of sticky silicone gel material, it can evenly stand on textured surfaces, such as office desktop, kitchen table, coffee shop table, car dashboard/ windshield,ect.

Buy from Amazon.com

Product Description

Ztechworld Universal Suction Cup Car Mount Cell Phone Holder for iPhone 7 Plus 6S 6/ Samsung Galaxy S7 S6 Edge Note 3 4 5/ Android Phones and More, Sticky Silicone Base, 360 Rotation, Red Clip

Ztechworld offers a simple design iPhone Holder for Car Suction Cup, with silicone gel base, extra large clamp compatible with most of smartphone devices.

It is a perfect accessory for all vehicle. This universal suction car mount with 360 iphone 6 plus offers a 360 degree rotation viewing angles, allowing you to watch your mobile phone screen in different directions.

Simple as it it, after you mount it on the car dashboard/ windshield, tighten the clip in a direction by rotating the swivel nut, then you can use one hand to set your cell phone devices to the phone suction mount. Very easy in operation.

Further more, this mobile phone suction holder has multiple usage purpose, you can use it to holde your cellphone on a coffee shop table enjoying short videos, you can install it to the kitchen wall while cooking, or having video conference with your clients by positioning the car mount on desktop.

Most importantly, the suction base is made of sticky silicone gel material, it can adsorb on textured surface,such as leather dashboard,wooden desktop,ect. This silicone gel is washable, when it is dirty, its stickness becomes weak, you need to clean it by water, after it is dry, the silicone gel is back to normal function.

Parameters:
Material: ABS+Silicone Gel
Color: Red clip, Black clip
Net Weight: 65g
Gross Weight: 80g
Clamp open: 5.3-9.0cm
Suction Base: Sticky Silicone Gel
Packing: Gift Box
Installation: For car windshield/ Windshield
Support 4.0-6.0 inches screen smartphones(even with phone case)

Features:
Fits for most devices with 4.0 to 6.0 inches screen
Safe and secure suction technology
Easy single-handed operation
360 degree viewing angles
Works for smartphones with extended case

How to choose the best charger and cable for your smartphone

1) Choose the correct charger:

This is simpler. Each charger comes with a label or inscription informing the current in amperes ( A or mAh ) and the voltage in volts (V) .
The voltage should always be 5V and the current must be at least 2A or 2000mAh . Below these values, generally, will be little for any current appliance. The maximum is usually 3A or 4A .

2) Cable selection (USB, MicroUSB, etc)

It does not look like it, but this task is just as important as choosing the charger. And it’s usually a lot more complicated than it sounds. First, because the difference between a quality cable and an inefficient cable is not always “visible”. Second, store sellers (virtually everyone) can not tell which cable is the best, and therefore end up making only brand recommendations or assumptions.

How to clean your phone or tablet screen? Product and movie!

The screen cleaning of a smartphone or tablet is simple. What you need to understand is not exactly what should be done while cleaning, but what should not be done and that can damage your device, such as using chemicals in cleaning the screen. Let us understand and look for the best solutions, products, and cleaning for the screens and films of these devices .

Products to clean cell phone screen: what not to use?

Before you go out shopping for a miracle cleansing kit for cell phone screens, it should be said things that should not be done by anyone who wants to wipe the screen of a tablet or smartphone without damaging it.

Chemicals should not be used. The only combination accepted is a combination of a part of water for a part of vinegar and even then, that combination is questionable. There are solutions recommended by manufacturers of electronic devices that can be used safely, but nothing replaces good old filtered water (because it filters particles that could scratch the screen).

Do not use paper towels, abrasive cloths, tissues, or any other type of cloth other than microfiber. This type of cloth was created specifically for the delicate surfaces of the fabrics.

When using water or cleaning product, do not overdo the amount. The cloth must be slightly dampened, and the screen must be turned off during cleaning.

Do not be crude at the time of cleaning, or you will scratch your device. If a dirt is persistent, prefer to lightly past several times and gently. If the screen has a protective film, the method may be slightly different.

How to clean your cell phone: starting with the microfiber cloth

The microfiber cloth is the same that comes with several one glasses for cleaning. It is a cloth with a special fabric, produced in order to avoid damage to the screens of electronic devices. They are very small fibers that do not attract dust and oils. This will not rub these particles on your device, avoiding scratches.

Cleaning the screen: procedures

Now that you have the appropriate cloth to clean the screen, the process is very simple:

  1. Always turn off the device.
  2. Wipe the dry cloth from left to right and then from bottom to top. Do not make circles with the cloth. Repeat the horizontal and vertical movements if the device is very dirty, but more persistent dirt is to the next step.
  3. Dampen part of the cloth with filtered water or a specific cleaning solution. Do the same cleaning process that was performed with the dry cloth.
  4. Dry the screen with the part of the cloth that is dry.
    To wipe the microfiber cloth, soak the cloth in lukewarm water and mild soap, rinse thoroughly, and allow to dry. Do not use any chemicals to wipe the cloth, either. These can damage the fabric.